QP、CQP系列氣動鉗盤式制動器

福彩3d:QP、CQP系列氣動鉗盤式制動器

產品編號:
QP-12.7A
產品型號:
產品描述:

QP、CQP系列氣動鉗盤式制動器廣泛應用于中小型驅動機構的停車制動或減速制動。卷繞機構的張緊制動,如造紙廠卷紙張緊、新聞印刷時新聞紙的張緊控制、鋼板(鋼絲)卷展開張緊及電線電纜放線、放纜張緊控制等。
QP□, CQP□系列氣動盤式制動器QP□, CQP□ SERIES PNEUMATIC DISC BRAKES

福彩3d www.bowqa.com 應用APPLICATION



●QP□、CQP□系列氣動盤式制動器,廣泛應用于中小型驅動機構的停車制動或減速制動。卷繞機構的張緊制動,如造紙廠卷紙張緊、新聞印刷時新聞紙的張緊控制、鋼板(鋼絲)卷展開張緊及電線電纜放線、放纜張緊控制等。
APPLICATION
●QP□、CQP□ Series pneumatic disc brakes are widely used for speed reducing, stopping/braking of the low or medium torque driving mechanism. The brakes can also be applled as tension brake on winding machines, such as: paper-web tension control, news paper publishing tension control, steel unwind control, wire and cable reel unwind tension etc.

主要特點MAINFEATURE



●QP□系列為常閉式設計:彈簧制動,氣動釋放(開閘); CQP□系列為??繳杓疲浩怪貧?,彈簧釋放,制動力可隨氣壓的改變而變化,使用時可根據需要靈活改變。
●結構緊湊、體積小、動作靈敏、重量輕、使用方便。
●卡裝式無石棉制動襯墊,綠色環保,更換方便、快捷。
●安裝方式:適合于水平軸或垂直軸制動方式。水平軸制動方式時,可沿制動盤周圍任意角度安裝,適用于水平安裝;垂直軸制動方式時,角度不受限制。一個制動盤,可安裝一臺制動器, 也可安裝兩臺或兩臺
以上制動器,安裝兩臺或兩臺以上時建議盡量對稱安裝。
●動力源無需單獨設置,與已有的空壓站并網使用,在供氣線路中加裝調速閥,制動時間可實現無級調整。
MAIN FEATURE
●QPO is normally closed design- spring braking; relbased by pneumati; CQPD is normally open design pneumatic braking,relased by spring, Brako force can bo adjusted by required air pressure,
●Compact structure and small size, light. It is easy to control and operate.
●The linings are of inserting Isallation style and non-asbestos. It Is oasy to be roplaced.
●Isallation;' tbe brake is oither horizontally mounted or vorially mounted. While it is used at horizontal shoft, the brake can bo positioned within any angel around the disc, but deally they should be mounted norlzontally (in 3or 9o'dlock position); whileit is pled at vertical shat, no angle Is required. Per disc can bo flted oither ane br ake or two and morg.
When two or more brakes are ppled, symmotrially Installation is rocomimended.
●It noedn't sot all power source separatoly, wllDe connectod with air comprssor station, and the braking time can be stopless adustment with speed control valve in the gns line.

使用條件OPERATING CONDITION



●環境溫度: -25℃ - +40℃
●較大工作壓力: 7bar
●氣源要求:通入氣包的壓縮空氣應干燥、潔凈,不能含有腐蝕性氣體。
●如有特殊需要,也可按用戶要求設計(在訂貨時注明)。
OPERATING CONDITION
●Ambient temperature: -25℃- + 40℃
●Operation air pressure(Max.): 7 bar
●Air requirement: dry and fiterd comprossed air, excluded corrosion gas.
●Speclal requirements can be discussed before production.

定貨標記 ORDER MARK



訂貨示例ORDER EXAMPLE



●QP12.7-A-L
CQP12.7-A-L-E1
QPL15-A
CQPL15-A-E1
QPD40-B-R-E2M
CQPD40-B-L-E1M

安裝及外形尺寸 OUTLINE AND INSTALLATION DIMENSION



技術參數及外形尺寸



{ganrao}