DYTP系列電液推桿

福彩3d:DYTP系列電液推桿

產品編號:
DYTP-2550/200/50 S
產品型號:
產品描述:

DYTP系列電液推桿是一種集機、電、液為一體的液壓驅動裝置,可廣泛用于冶金、建材、化工、起重運輸及港口裝卸機械中的閥門、閘門、換向、傾轉、擺動等機械的驅動和控制,可取代傳統的電動推桿、液壓缸(由液壓站驅動)和氣缸(由氣泵站驅動控制)。
DYT系列電液推桿DYT SERIES ELECTRO-HYDRAULIC PUSHER

福彩3d www.bowqa.com 應用APPLICATION


●DYT系列電液推桿是一種集機、電、液為一體的液壓驅動裝置,可廣泛用于冶金、建材、化工、起重運輸及港口裝卸機械中的閥門、閘門、換向、傾轉、擺動等機械的驅動和控制,可取代傳統的電動推桿、液壓缸(由液壓站驅動)和氣缸(由氣泵站驅動控制)。
APPLICATION
●DYT series electro-hydraulic pusher is hydraulic drive device which integrates electricity, mechanism and hydraulics. It is widely used as drive and control device for various valves, pen stock, pendulum and steering mechanism in metallurgical, building,chemical, port handling machinery and cranes. It is a deal solution for replacing the traditional motor- driven pusher, oil cylinder with hydraulic station and air cylinder with air unit.

主要特點MAIN FEATURE


●結構緊湊、安裝方便、占據空間小、維護簡單。
●回路設有雙向液壓鎖,可停在規定行程范圍內的任意位置停止并自鎖,且保持輸出力不變。
●推拉力、速度(用戶要求)無級可調,驅動力范圍極廣。
●因故斷電,推桿自鎖,避免發生事故。
●采用全液壓傳動、動作靈敏、運行平穩,能有效緩沖外來沖擊力,行程控制精確。
●機電液一-體化全封閉結構,工作油路循環于無壓的封閉鋼筒里,體積小,不滲油,在惡劣的工作環境下,
不吸塵,不進水,內部不銹蝕,使用壽命長。
●電器控制簡單,通過增設各種限位開關,實現遠程和危險區域的操作控制及計算機(PLC)自動控制。
MAIN FEATURE
●Compacl structure, easy installation, small occupying space and simple maintenance.
●A two-way hydraulic lockis arranged in the loop, which can be stopped at any position within the prescribed travelrange and self locked, and the output force remains unchanged.
●Push force and speed (user requirements) are step-less and adjustable, and the driving force range is very wide.
●Therefore, the power is cut off and the push rod is self locked to avoid accidents.
●It adopts full hydraulic transmission, sensitive action and smooth operation, which can effectively buffer extemal impact force and precise stroke control.
●Mechanical and hydraulic integrated closed structure, working oil circulation jo the pressure free closed steel cylinder, small volume,no oil seepage, in bad working environment, no dust. No water, no corrosion inside, long service life.
●Electrical control is simple. By adding various limit switches, itis easy to realize remote control and dangerous area operation control,and computer (PLC) automatic control.

工作原理WORKING PRINCIPLE


●電液推桿是一種機、電、液一體化的新型柔性傳動機構,它以執行機構(油缸)、控制機構(液壓控制閥組)和動力源(油泵電機等)組成,根據現場安裝空間及用戶使用情況電液推桿可有多種結構形式(具體見電液推桿外形安裝尺寸圖,也可根據用戶要求定制樣式)。電動機通過正反轉驅動雙向液壓泵正反輸出壓力油,經液壓控制閥送至油缸,實現活塞桿的往復運動。
WORKING PRINCIPL E
●The electro-hydraulic pusher is a new type of flexible transmission mechanism, which is composed of the actuator (oil cylinder); the control mechanism (hydraulic control valve group) and the power source (oil pump motor etc). The Electro-hydraulic pusher can have various structural forms according to the site installation space and the user's use. You can also customize the style according to the requirements of
the user. The motor drives the bidirectional hydraulic pump forward and reverse to output the pressure oil through positive and negative reversals, and sends it to the oil cylinder through the hydraulic control valve to realize reciprocating motion of the pistonrod.

結構性能STRUCTURE PERFORMANCE


●液壓控制閥組主要由溢流閥,吸油單向閥,單向閥,調速閥(根據用戶要求),液控單向閥(液壓鎖)等組成,也可根據電液推桿的工作特性,設計不同功能的油路組合閥,滿足其工作要求。一般有推出自鎖,拉回自鎖和推拉均自鎖;運行速度有可調速型,不可調速型;電液推桿工作角度有水平推,向上推(包括斜向上),向下推(包括斜向下)等幾種形式。
STRUCTURE PERFORMANCE .
●The hydraulic control valve group is mainly composed of overflow valve, oll sucking one -way valve, one -way valve, speed regulating valve (user request), liquid controlled one- way valve (hydraulic lock) and so on, and it can also be pushed by electric liquid. The working characteristics of the rod are designed, and different functions of the oil way combinationvalve are designed to meet its working requirements. Generally, self lock is introduced, self locking and push-pull self. -locking are achieved. The speed governing type is not adjustable, and the working angle of the Electro-hydraulic Pusher has horizontal pushing, pushing upward (including oblique upward), pushing downward (including oblique downward) and so on.

使用條件OPERATING CONDITION


●環境溫度: -20℃ ~ +50℃
●相對濕度:≤90%
●電源電壓: 3相、交流380V. 50Hz
(其它電源電壓下的電流參數請與我們技術人員聯系)
●適應的工作制: S3, 40%接電持續率
●有特殊要求時,在訂貨時協商確定。
OPERATING CONDITION
●Ambient temperature: -20℃- + 50℃
●Relative humidity:≤90%
●Voltages: AC 3 phase 380V 50Hz ( Other voltage can be made as required )
●Operating duty: intermittent (S3, 40%)
●Special requirements can be discussed before production.

訂貨標記 ORDER MARK


訂貨示例ORDER EXAMPLE


●DYTZWB 1000-400/50PK1.F DYTPX3000- 1000/90X K2.F. A.S1 50Hz.660V
●注:整體外置式電液推桿(DYTZW型)制造額定推力在100-3000kg范圍內、行程在5-600mm范圍內(由于油箱
容積小,所以制造行程有限制),若超出此范圍可選用整體直式型(DYTZ型),技術參數基本相同。
(符合制作要求的DYTZW型也可標為DYTZ型)
●Note: the overall external Electro-hydraulic Pusher (DYTZW type) makes the rated thrust within the range of 100- 3000kg and is within the range of 5-600mm (because the volume of the tank is smal, so the travel limit is made). If the overall straight type (DYTZ type) can be chosen beyond this range, the technical parameters are basically the same.
(the DYTZW type that meets the production requirements can also be labeled as DYTZ).

附加裝置(選擇) OPTIONS AND ACCESSORIES (SELECTION)


●外置限位開關:可提供無觸點感應式(接近開關)和有觸點接觸式(機械式開關)供客戶選擇。
●安裝底座:默認本廠制作標準,也可根據要求訂制。
●手動裝置:手動泵或手輪,實現手動驅動。
●防塵罩:?;せ釗說娜嶁鑰繕燜醣;ふ?。
●根據用戶需要,可生產各種防爆及非標產品。
OPTIONS AND ACCESSORIES ( SELECTION)
●External limit switch: it can provide non-contact inductive (proximity switch) and contact contact type
(mechanical switch) for customers to choose.
●Installation base: default factory production standard, can also be customized according to requirements.
●Manual device: manual pump or hand wheelto realize manual driving.
●Dust cover: flexible and telescopic protective cover for piston rod protection
●We can produce various,explosion-proof and non-standard brake as you required.

DYT系列電液推桿技術參數及安裝尺寸TECHNICAL DATA AND DIMENSIONS OF DYT SERIES ELECTRO-HYDRAULC PUSHER


●一、S為推桿額定行程。
●二、上列表中所列電機的電壓為AC 380V,防護等級IP55,絕緣等級為B。
●三、超出列表的行程制造范圍或速度制造范圍的,另行注明,否則按表內技術參數制造。
●四、列表中的速度范圍為水平使用時的范圍,向上或向下使用的速度均為水平的1/2。
●五、列表中的電機功率,是推桿在額定輸出力和額定推速較大時的電機功率,電機功率與推拉力成正比。
●六、本公司可定制各類特種電液推桿,額定推力較大可達80T,額定行程可達8米。
●七、具體型號,結構外形尺寸保留更改的權利。
1.S is the rated stroke of the push rod.
2. The voltage of the motors listed in the upper list is AC380V, the protection level is IP55, and the insulation levelis B.
3. The scope of manufacture or speed of manufacture beyond the list should be specified otherwise, otherwise it will be manufactured
according to the technical parameters in the table.
4. The speed range in the list is horizontally used, and the speed up or down is horizontal 1/2.
5. The motor power in the list is the motor power of the putter at the rated output force and the maximum rated speed, and the motor
power is directly proportional to the pushing force.
6. The company can customize all kinds of special Electro-hydraulic Pusher, the rated thrust can reach 80T, and the rated travel can
reach 8 meters.
7. The size of the specific type and structure should be retained.
{ganrao}